This is default featured slide 1 title
Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.
This is default featured slide 2 title
Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.
This is default featured slide 3 title
Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.
This is default featured slide 4 title
Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.
This is default featured slide 5 title
Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.
Here Is Little Info About SonyEricsson DB2010/12, DB2020 Series..
1 . What Is DB2010/12, DB2020 Series ?
A . SEMC (Sony Ericsson Mobile Communications) hardware platforms. It's something similar to chipset in PC. more information see here (http://www.gsmhosting.com/vbb/showthread.php?t=327840)
2 . how to check Sony ericsson firmware version
A . > * < < * < * Where < or > are directions on the joystick, and * is the bottom left hand button on the keypad.
3 . What Is firmware Version?
A. firmware Version Which Ur Phone Have. You Must Flash Same Version Or Newer Then It MAIN Or fs File To Phone Only..
4 .How to enter my Unlock Code on SonyEricsson ?
A . Model : All SonyEricsson
1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,
6 - You can now enter the Unlock Code we send to you.
If your phone have a "JOGDIAL" (ex : SonyEricsson K700i) you must press "down arrow" instead of
"left arrow" for step 2 & 3. We mean by "Down Arrow" to direct the Jogdial down !
W950 And Others Scrool Models
Service Menu (* up * down down * down *)
Code Menu (* up * down ** down (up/down using the jog dial on the side)
( side, down,**,down )
5 . What Is Cid?
A . This "number" defines the version of SE's protection present in the phone. New CIDs are deployed from time to time.
Current CIDs in use by SE are 29/36/37/49/50/51/52 & now 53.
6 . What Is GDFS?
A . This is the phones "stash", where all settings and calibration data is stored (this also goes for the firmwares IMEI-resource as well as the SIMlocks). Similar to other brands use of NVRAM (Non-Viotile Random Access Memory).
7 . What Is Rezone We Need XS ++?
A. [1] To Flash Firmware To Phone [2] Firmware File upgrade To Phone [3] customize phone ...link here (http://www.gsmhosting.com/vbb/showpo...75&postcount=5)
Nokia UEM ASIC type overview
Nokia 1100 | Nokia 1101 | Nokia 1110 | Nokia 12i |
Nokia 1600 | Nokia 2300 | Nokia 2600 | Nokia 2650 |
Nokia 2651 | Nokia 2652 | Nokia 3100 | Nokia 3105 |
Nokia 3108 | Nokia 3120 | Nokia 3125 | Nokia 3128 |
Nokia 3129 | Nokia 3152 | Nokia 3155 | Nokia 3155i |
Nokia 3200 | Nokia 3220 | Nokia 3300 | Nokia 3320 |
Nokia 3321 | Nokia 3360 | Nokia 3361 | Nokia 3510 |
Nokia 3510i | Nokia 3520 | Nokia 3530 | Nokia 3560 |
Nokia 3590 | Nokia 3595 | Nokia 3595i | Nokia 5070 |
Nokia 5100 | Nokia 5140 | Nokia 5140i | Nokia 6020 |
Nokia 6021 | Nokia 6030 | Nokia 6060 | Nokia 6061 |
Nokia 6070 | Nokia 6080 | Nokia 610 | Nokia 6100 |
Nokia 6101 | Nokia 6102 | Nokia 6103 | Nokia 6108 |
Nokia 616 | Nokia 6200 | Nokia 6220 | Nokia 6225 |
Nokia 6225i | Nokia 6235 | Nokia 6235i | Nokia 6255 |
Nokia 6255i | Nokia 6310 | Nokia 6310i | Nokia 6340 |
Nokia 6340i | Nokia 6360 | Nokia 6500 | Nokia 6510 |
Nokia 6560 | Nokia 6590 | Nokia 6590i | Nokia 6610 |
Nokia 6610i | Nokia 6620 | Nokia 6800 | Nokia 6810 |
Nokia 6820 | Nokia 6820i | Nokia 6822 | Nokia 7200 |
Nokia 7210 | Nokia 7250 | Nokia 7260 | Nokia 810 |
Nokia 8310 | Nokia 8390 | Nokia 8910 | Nokia 8910i |
Nokia 9300 | Nokia 9300i | Nokia 9500 |
ASIC type 5
Nokia 3230 | Nokia 3600 | Nokia 3620 | Nokia 3650 |
Nokia 3660 | Nokia 6260 | Nokia 6600 | Nokia 6670 |
Nokia 7610 | Nokia 7650 | Nokia N-Gage | Nokia Remote Camera |
F.A.Q About Sony Ericsson Phones 1
================================================== =========================================== 1 Who Is SEMC? A. Semc Is Sony Ericsson Developers Group Who Made Till Now Made Many Type Of Phones.Avr Arm Arm New(DB2010 & DB2012) PDA DB2020 A2 Locosto. --------------- B. Semc Is Sony Ericsson Company Which Provide All Phones To Local Market Semc Is Developer Team Them Self Who Develops Solution And Security For Sony Ericsson Company. ================================================== =========================================== 2 How To Know My Model Is Which? A. Check At Phone Back. --------------- B. DB2000 = K600,K608,V600,W900,Z800,V800,Z1010, DB2010 = J300,K300,K310,K500,K508,F500,K510,K700,K750,D750, S700,S710,,W300,W550,W600,W700,W800,W810,Z500,Z520 ,Z525,Z530,Z550, DB2012 =
Sony Ericson General Informations regarding CID, CDA, COLOR, GDFS etc.
CDA = This "number" defines which variant of a specific firmware a phone is supposed to have.It lets among others SEUS (Sony Ericsson Update Service) know which language-pack/branding/bandlocks a phone is to be flashed with. A generic (unbranded) K750 for use in Scandinavia will be CDA102337/12, whilst a Telenor-branded K750 will be CDA102338/62. Both will be flashed with the same languages/dictionaries, but the latter will be flashed with Telenor-branded firmware.
Nokia Imei/esn Repair
TO HELP ALL MEMBERS OF MYGSMINDIA.
AND TO LET ALL WORLD KNOW HOW TO CHECK AND REPAIR THERE PHONES..
I WRITE ALL DETAILS ABOUT IT HERE ..
INFOMATION IS FOR ONLY PHONES DCT4 WD2 TIKU AND DCT4+ PHONES.
1 = YOU NEED JAF OR MT BOX OR F1 BOX OR GRIFFIN OLD BOX.
2 = YOU MUST CHECK PHONE IMEI/ESN DAMAGE RESONE..LIKE ITS FLASH AREA IMEI DAMAGE? OR ITS UEM AREA IMEI DAMAGE?
3 = FLASH AREA IMEI
b = FLASH AREA IMEI (DATA1 IN RPL)U HAVE TO CHECK UEM IMEI TO BE SURE THAT U HAVE LOSTED ONLY FLASH AREA IMEI.SOME TIME IN ERASE FLASH WE LOST FLASH AREA IMEI.SOME TIME IN FLASH IC DAMAGE OR WE CHANGED WE LOST FLASH AREA IMEI..
How To Repair IMEI (?????????????????) Damage In Dct4 Wd2 Tiku Phone?
There Is No Perfect Method To Know Uem Is Good Or Not.
There Is No Perfect Method To Know After Rpl Write Phone Watch Dog Timer Will Work More Then 32sec Or Not.
Here Is Litel Info About What I Know About Dct4 Wd2 Tiku Phone Imei (???????????????) Damaged And This May Help Users To Find Fastest Way To Repair There Phone And Easily Also.........
1 = What Is Rezone Phone Show Imei (?????????????????)?
A. There Is Only 2 Rezone I Know [1] Phone Flash Ic Losted Imei Info In Pm (Eeprom) 208..[2] Phone Uem Damaged .
2 = What Is Rezone Phone Off In 32sec?
A. There Is Only 2 Rezone Uem Watch Dog Timer Start To Make Phone Off In 32 Sec.. [1] Uem Test Phone Flash Ic Imei Is Not Found Same Of Found Damaged Imei (???????????) [2] Phone Uem Is Damaged
3 = Is It Possible Imei In Phone And Phone Still Off In 32sec?
A. Yes If Flash Area Imei Not Same As Uem Imei.
If Rpl Calc With Different Imei Then Uem One.
If Phone Have Patched Imei.
Phone Uem Is Damaged
F.A.Q About BB5 Contact Retailer Locked For All Provider & RPL WRITE.
Info About Contact Retailer In BB5 & SP Area Damaged & RPL Write Phone.
Few Things You Have To See Before Repair.
1 Phone IMEI Is Damaged Or Not? F.E 123456789012345
2 Phone Sp Area Is Damaged Or Not? F.E Config key -FFFFFFFFFFFFFF & PROVIDER - unknown
ex1
CONFIG KEY: 0000000000000000
PROVIDER KEY: 0000000000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0
ex 2
CONFIG KEY: FFFFFFFFFFFFFFFFF
PROVIDER KEY: 0000000000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0
WITHOUT REPAIRING THIS PART FORGET DOING ANYTHING ELSE.
IF YOU HAVE ONE OF THIS MEANS YOUR PHONE IS ON CONTACT SERVICE OR LOCKED TO ALL PROVIDERS.
SIMLOCK REPAIR MAY HELP LIKE SL REPAIR BUT ITS CAN ONLY REPAIR 308 NOT WATCH DOG TIMER. SO PHONE WILL KEEP OFF IN 3 TO 13 MIN.
F.A.Q About SonyEricsson DB2000/10/12/20/3150/3210/3350/pnx5230 Series 2
READ BEFORE ASKING ANYTHING !
A. SEMC (Sony Ericsson Mobile Communications) hardware platforms. that is chipsets of new SEMC phones.
Db2000 (otherwise called marita "full") is inside next phones: z1010/v800/z800/w900/lg3g/sharp3g
Db2010 (otherwise called "marita compact") is inside j300/k300/k500/k700/s700/k750 phones.
Db2020 (otherwise called "marika") is inside k610/k550/k790/k800/w850/w880/z610/well, almost in all new phones.
Pnx5230 is inside z310,w350,w380,z555 phones.
Db3150 is A2 generation, phones like k850,w910,w890,z750,etc have it
Db3210 is next revision of A2 platform and there is not yet retail phones released with that ASIC.
Db3350 is even future platform from SEMC.
HWK Troubleshooting
This error code can be solved with the instructions on the following page: http://www.gsmhosting.net/vbb/showpo...69&postcount=7
Box Auth Error 20 / 32
This error can be solved with the instructions on the following page: REQ-> FBI Process - Box Auth Error 20 - GSM-Forum
Box Auth Error 1
The HWK module is built into the Flash device. The installation should solve the problem.
Error 112-1-0219
This error appears when a HWK Cracker is used. Delete the following files (hwkkiller.dll + ufsloader.dll) from this directory: C: \ WINDOWS \ system32
Install HWK Suite then new.
HWK Upgrade Client FAQ
- It is better not to use Win98 to upgrade HWK module. Please use Win2k/XP only because Upgrade client was developed for these OS'es
- Old UFS and HWK software versions will not work after HWK module, new software versions will also not work with not updated HWK module
- Please disable all antivirus and firewall softwares before upgrade
- Before running upgrade client it is recommended to set screen resolution to not less than 1024x768 and font size to Normal
- NEVER publish your UFS and HWK serial numbers on forum
- Please pay attention to the message, that is shown by software at the end of upgrade procedure. If it is - "Update successful, use Client again to authorize HWK", you should run upgrade client again to authorize your HWK module (actually - repeat operation).
Error messages:
1. HWK SD REPAIR ERROR: xxxxx
2. Your account is suspended.
3. No more upgrade logs.
4. Server is going to shutdown. Please try update in 20 minutes.
5. Account for this HWK module does not exist on server.
6. Authorization failed! Are you using the latest HWK Upgrade client software version?
7. Your account was closed by the server administrator.
8. Error: Your update client version is expired! Please download new client from the support area and start the upgrade again.
9. Error upgrading applets: HWK UPDATE ERROR: xxxxxx
10. Error connecting to ufs: hwk login error: xxxx
11. Authentication stage error: Server reported error:Not translated!
12. Connection to server failed: Socket Error # 10060
Connection to server failed: Socket Error # 10061
Connection refused.
HWK Errors Code List
HWK upgrade error. This error occures when HWK was affected by third-party tools before upgrade or your HWK is a clone. Please don't contact anyone, it's your own stupid fault.
2. Your account is suspended. Please contact your reseller!
Your account is blocked by administrator. Please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
3. No more upgrade logs.
HWK module with this serial number was already upgraded. If you already upgraded your HWK, you need not to upgrade it again until directed. If you haven't tried to upgrade it yet, get this error on upgrade and cannot run latest software versions, please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client